>適用范圍/Scope of application

 主要應用于電子、3C、光通訊、新能源電池等行業精密器件的金屬焊接,可實現單路或多路激光的同時點焊和連續焊,可實現對各類金屬材料(不銹鋼、碳鋼、鋁、銅等)的焊接。例:手機通訊、電子元器件、眼鏡鐘表、五金衛浴、醫療器械、汽車零配件等精密零件的焊接,可實現點焊、拼焊、穿透疊焊、密封焊接等

 Is mainly used in electronics, 3 c, optical communication, new energy battery industries such as precision metal welding devioe, single or multiple laser which can realize the continuous spot welding and welding at the same time it can realize to all kinds of metal material (stainless steel,carbon steel, aluminum, copper, etc.)of the welding. Example mobile communications, electronic docks and watches, glasses, hardware sanitary ware, medical equipment, auto parts and other precision parts welding, which can realize welding, welding penetrates the stitch welding, sealing welding, and so on

 >產品特點/Features

 ⊙能量監測功能:可實現監測激光能量和平均輸出功率,及時發現異常并啟動保護程序。

 ⊙能量負反饋功能:電源自帶的能量反饋探頭,實時校驗激光能量的大小,保證了焊點的一致性?？捎行Ы鉀Q:

 1市電的波動影響激光輸出能量的波動;

 2氙燈每次放電的差異性帶來激光輸出能量的波動;

 3燈老化導致輸出激光能量的減小;

 4水流量的變化、水溫的變化等因素導致激光輸出能量的波動。

 ⊙多功能外部保護端口:電源有多個外部保護端口,對設備的水溫、水壓、流量及光纖溫度等進行實時監測

 ⊙任意波形設定:設備可設置32組不同焊接工藝參數模式,單組模式下,設有24個拐點,拐點寬度為0-15.0ms拐點幅度0-100.0%,從而滿足不同的焊接需求。

 ⊙有效解決對于銅、鋁、金等材料對1064nm波長激光反射率高,導致加工過程中存在加工強度不夠、焊接表面不美觀的問題。

 ⊙對于高碳鋼等材料,由于急冷急熱導致加工中出現熱裂紋、冷裂紋等問題,可通過設置激光脈沖的能量波形來控制焊接

 過程中激光能量的變化,調整合理的激光熱輸入量來有效控制各種焊接缺陷。

 ⊙多光高速路切換:電源帶有自動光閘控制功能,可以實現時間分光和能量分光

 ⊙可選配:振鏡式焊接工作臺/二維或多維焊接工作臺/機械手焊接工作臺。